Out of the box, your complete system should consist of the following items:

• Orbi Router
• Orbi Wall Plug Satellites
• Ethernet Cable
• Power Adapter

When your Orbi Router is completely setup and working, you want to take note of the following: The Power LED in the back of the device should be Solid Green and the Router LED Ring (top of device) should be off, this indicates that the router has finished booting and is working properly.

Your Satellite wall plugs should also have no ring light at the top, this means it is properly synced to the Orbi Router and is running.

Setting Up Your Netgear Orbi WiFi System

Orbi Router

1. Unplug the power from your cable modem
2. Connect the Yellow Ethernet Cable into your cable modem’s Ethernet Port, then connect the other end into your Orbi Router
3. Plug the power cord back into your Cable Modem
4. Plug the power cord into your Orbi Router
5. If you do not see any lights on your Orbi Router, press the power button on the back of the device.

Orbi Satellites

1. Plug in your Orbi Satellite into the wall socket. Choose a reasonable distance from your router to offer better WiFi coverage in your home or office.
2. The light on the Satellite device should be on, if not, then press the power button in the back of the unit.
3. Your Satellite will go through a few color changes. When the device settles on Blue, that means your Satellite and Router are successfully synced and has a great connection. If the color is Amber, that means the connection is fair, but can be better. The Magenta color means your Satellite device failed to sync.

Trouble Shooting Your Satellite Device(s)

Amber Color – If your device is displaying the Amber color, unplug your Satellite and position it closer to your Orbi Router.

Magenta Color – If your device is displaying the Magenta color, same as above, re-position it closer to the Orbi Router. Press the Sync button on the back of your Orbi Router. Within 2 minutes, press the Sync button on the back of your Orbi Satellite.

Repeat steps until you see a steady Blue light at the top of the Orbi Satellite.

Connecting to your Orbi WiFi network

1. After following all of the steps above, the Orbi Router & Satellite are working. You can simply access your network by selecting the Orbi Network from your WiFi selection screen on your mobile device.  To locate the WiFi Network Name (SSID) and Password, you can find them on your Router Label. If you are connecting to your Orbi Router via Ethernet network cable, you won’t need any user name or password.
2. Launch a web browser (Firefox, Chrome, Safari) and type in orbilogin.com
3. Follow the onscreen instructions to complete the installation process.
4. You are now connected to the internet!

Accessing the Orbi Web Interface

1. Launch a web browser (Firefox, Chrome, Safari) and type in orbilogin.com
2. Enter Username: Admin / Password: What you created during the installation wizard

With access to the Orbi Web Interface you are allowed to adjust settings such as:

• Port Forwarding
• Guest WiFi Access
• Circle with Disney
• Network Security
• Website filtering via keywords
• Updating WiFi SSID and Password
• Connecting new Satellite devices
• Updating ISP Connection
• DNS Server Configuration
• Email Alerts

Anything we didn’t cover or any questions you have regarding the system or your device? Let us know in the comment section below. Thanks for reading.

The post How to Setup Netgear Orbi AC2200 Tri-band WiFi System appeared first on New Computer Inquiry.

FastLane3 is a smart marketing term that Netgear developed to describe three important Netgear components of the Nighthawk X6s those being tri-band Wi-Fi, a dedicated Wi-Fi link from the extender unit to your router and an optimized antenna design inside the range of the extender. That is the secret sauce to extwnding fast wireless coverage in your home or office without compromising bandwidth.

The NETGEAR Nighthawk X6S range extender is designed using the technology developed by Netgear for its popular Orbi WiFi system. It is taggerd as a tri-band router, but for clients it’s tagged as a two-band model. A band is reserved as a dedicated backhaul channel, leaving two bands of consumer facing connectivity. It offers bandwidth up to 3 Gbps and supports an important technology such as Mu-MIMO and a form of beam shaping. It can work as a range extender as well as an access point, making it compatible with just about any router on the market.

Design

It is designed as a table extender that can be placed on a desk, table or shelf. It is rather monolithic and also looks like a large slab that is standing tall. The front is quite plain except for a Netgear logo and a series of LED status lights. These status lights indicate activities of the WiFi system as a whole, power, Ethernet connectivity, and as well as separate indicators for each WiFi channel.

Connectivity

At the back, there are five separate Ethernet ports. Four of them are outlets that allow you to connect your wired devices to the Internet. One of them acts as a LAN port. This LAN port is used to make the extender work as an access point. This means that you connect it to a hard wired network and producing an entirely new wireless network. This is useful in commercial settings where you want to create a customer facing wireless network that is easily accessible. Client facing networks can have their own names and rules, preventing guest from accessing parts of your network that would otherwise be considered unavailable.

Range

A single Nighthawk X6S router has enough range to comfortably cover a 2500 square foot home. This extender has similar technology and can cover the same range. However, if you use two, you will not get a coverage of 5000 square feet.

The reason behind this is that the extender must first have a decent wireless connection for a start. If you place it inside of a dead zone, it wont be able to connect to the base router. The simplest solution is to place them between the area where the connection is bad. This would increase the range by 50%.

Overview of the technical features of the product

• Extreme AC3000 WiFi speeds- up to 3Gbps (1733 + 866 + 400)
• One Wi-Fi network name (SSID) with any router – Use the same name as your existing Wi-Fi network to allow devices to automatically connect to the router or extender (mesh network)
• Patented FastLane3 technology – for a no-jam path that allows your devices to connect to the Internet
• Smart Roaming – you can connect your mobile devices inte legently to the best available Wi-Fi network for superior streaming when you move around your house
• Smart Connect – for intelligently selecting the optimal wireless band for each device
• Multi-user MIMO (MU-MIMO) – for simultaneous streaming of data to multiple devices
• Tri-Band Access Point – via Ethernet, create a Wi-Fi hotspot with your existing router or your pre-wired home
• Quad-Core Processor – Improves Wireless and Wired Performance for Better 4K Streaming and Off-Shift Play
• Six high performance antennas – for optimal performance
• Four gigabit Ethernet ports – for connecting wired devices
• ReadySHARE USB Port – Connect your USB printer to the USB 2.0 port

Should you buy it?

Yes, it’s a must for anyone who wants to expand the network at home. This is a great router, and if you really need an extender then you will surely want this, it’s worth every dollar you spend on this router. With this router, you can easily create your own powerful advanced wireless network. Enjoy all the advanced router features Nighthawk offers and effortlessly create your own Wi-Fi network by adding the Tri-Band WiFi range extender. You now have the flexibility of customizing networks in 2.4 and 5 GHz networks. Use the SSID of your existing router to create a single network or use multiple SSIDs to create separate networks.

Pros

• 4×4 5 GHz broadband radio can be used for rear or fronthqul
• Impressive extenden throughput
• Great coverage (in 2400sf home) and easy installation

Cons

• Expensive
• Aesthetics

Conclusion

There is no doubt that it is the most powerful WiFi extension on the market. The Nighthawk X6S Triband wireless range extender supports your WiFi at speeds up to 3Gbps. From your garage to the backyard, eliminate dead wireless zones and extend your wireless coverage to hard-to-reach areas of your home. The X6S Range Extender uses the same wireless network name (SSID) as your existing router. Devices can automatically connect to your router and extender without having to manually switch between each devices.

The post NETGEAR Nighthawk Mesh X6S Tri-Band WiFi Mesh Extender Review appeared first on New Computer Inquiry.

In our setup guide, we show you how to install and get your X4S (AC2600) smart router operational.

Setting Up and Installing Your X4S AC2600 Router:

1. Unbox all of the accessories which includes the router, power adapter, Ethernet cable, four antennas, and the user manual.

   If you have an existing router connected, disconnect it (remove Ethernet cable and power cord) and write down the existing WiFi SSID name and Password. Keep the existing Ethernet cord connected to the modem.

2. On the AC2600 router, remove the antenna protectors. Observe that each antenna port has a number. Carefully install each antenna one by one on the specified numbered port.
3. Now that your antennas are connected, plug the Ethernet cable from your modem into the yellow Ethernet port in your AC2600 router.

   If you have a network switch or other wired devices in your home or office network, connect them now via Ethernet cable right into the AC2600 router.

4. Plugin the power cable and press the ON button (located in the back of the router).
5. After are the lights power on, it’s time to setup the router using an internet browser either on a desktop/laptop computer or on your mobile device via WiFi.

   The WiFi SSID username and password is located as a sticker right on top of your AC2600 router. Use those credentials to establish a connection. If you would like to use your computer instead, open your web browser (Firefox/Chrome/Safari), and type in http://192.168.1.1 and press enter.

6. Whether your using your mobile device or computer at this moment, connect to the AC2600 routers administrator panel through the web browser and follow the setup wizard.
7. You will have the option to change the existing routers WiFi username and password. If you want to keep your NETGEAR’s login credentials as is, you can skip that page and continue in the wizard.
8. An option to download NETGEAR’s desktop software will be presented to you. This is optional and not needed to successfully connect to the internet.
9. The setup will allow you to create a password for the administrator panel (where you can setup port forwarding, check the status of your internet connection, update the firewall, etc.) Default Username will be admin. Password is whatever you create.
10. The wizard will also ask you to download the latest firmware update, select yes.
11. Final step is to register your product online. This is recommended so that you can receive updates and firmware notifications. Keeping your router updated to the latest firmware is very important.
12. Your setup is now complete. Now you can stream Netflix, do online gaming, and browse Netflix all at the same time without any latency issues. Enjoy your new or upgraded WiFi experience.

The post How To Setup Your NETGEAR Nighthawk X4S AC2600 Smart WiFi Router appeared first on New Computer Inquiry.

Setting Up Your AC1750 Smart Dual Band WiFi Router

1. Before setting up your WiFi Router, make sure that you have an existing internet connection from a Modem. (A modem is what your Internet Service Provider or Cable Company provided you when you purchased a internet service package.)
2. If you haven’t already, unpackage the router and it’s accessories. You should have the Router, a yellow Ethernet Cable, and a Power adapter.
3. For the best WiFi performance, position both the left and right Antennas 45 degrees away from the center.
4. Turn off your Cable Modem and make sure your WiFi Router is not connected to a power source. In the back of your WiFi Router, their is a yellow port called “Internet”, take the yellow Ethernet Cable and plug it there.
5. Take the other end of the yellow Ethernet Cable and plug it into the Ethernet Port of your Cable Modem.
6. Connect the power source for your Cable Modem and your WiFi Router. Turn on both devices. (You will know when the router is on and ready when the Power LED lights are amber and then turns white.)
7. On the router device their should be a label that contains the preassigned WiFi login credentials (Username and Password). Open any working browser from a WiFi enabled device (Mobile Device, Tablet, etc.) and select your WiFi network.
8. After connecting to your WiFi network, open any web browser, type a web address (google.com, etc.) and see if you have internet access. You now should be all set.

Usually before successfully connecting to the router, an installation assistant displays in your web browser. You can visit www.routerlogin.net to connect directly into your WiFi routers admin panel. Use the following credentials to login (case-sensitive): username: admin / password: password.

The admin panel allows you to access all of the routers features such as port forwarding, optimizing internet speeds for video streaming (Netflix, Youtube, etc.) and video gaming (Xbox, PS4, etc.). Other great features available from the Router are using the device as a media hub by connecting any external USB Storage Device. You can block internet access with a Keyword Filter to prevent children from looking at the wrong websites. VPN (Virtual Private Network), have your own private network where you can access your personal files from all over the world or host your own Website.

If you haven’t purchase the NETGEAR Nighthawk AC1750 Smart Dual Band WiFi Router (R6700), now it’s the time. This is a device that will future proof you for the new emerging technologies that become available.

The post How To Setup Your NETGEAR Nighthawk AC1750 Smart Dual Band WiFi Router appeared first on New Computer Inquiry.

Features for the Netgear N600:

• The genie app comes with live parental control settings that enables the user to set filters and controls on content which enters the network. It also enables the creation of a guest network
• Wi-Fi protected access (WPA/WPA2 and WEP security, Dos attack prevention)
• It is compatible with Windows, Mac and Linux OS
• It uses 802.11n Dual Band wireless technology
• Readyshare USB feature enables users  access and share USB storage via the wireless connection
• Easy to install(installation instructions are pre-loaded in the router)

 Technical Specifications:

• Weight: 0.50 lb (0.23 kg)
• Physical Dimensions: 6.89 x 4.53 x 1.0 in (175 x 115 x 25 mm)
• Wi-Fi Band: Simultaneous dual band 2.4GHz & 5GHz
• 4 LAN Ports

Pros

• NetGear provides a 90 day, round the clock customer service support system if the unit is purchased from an authorized dealer. The purchase is backed by a one-year hardware warranty.
• Complete administrative control over network and incoming traffic content
• Readyshare USB storage sharing ability
• Easy installation

Cons

It is better to keep with the default firmware version, any attempt to upgrade to anything higher could significantly diminish the total functional utility of the device.

Conclusion

This device is an Alpha in its class. Its strengths lie in its ease of use, security and the various options that give the user complete administrative control over features, thus allowing them tweak settings to their own personal tastes. It’s high quality of service especially in the Wi-Fi performance, Band and Range ensures that it would be highly sought by gamers for streaming and on-line play. The price is satisfactory especially when one considers the features offered. This router would stay out of the junkyard for a long time.

The post Netgear N600 Dual Band Wi-Fi Router (WNDR3400) Review appeared first on New Computer Inquiry.